Cribrol filters with cartridges are used to filter oils, gases, motor gasoline, diesel fuel, fuel for ship gas turbine engines while accepted to and released from the storage houses, and fueling of equipment; aircraft fuel is treated with Cribrol filters only when accepted to the aircraft fuel storage houses.
|Types be cleaned media||Performance
|Technical or vegetable oil||0,5
|Inert gases or air (gas separator)||20
|The water or coolant||1
Filter has a case with an upper split that allows installing Cribrol filtering cartridges both inside and outside of the case. Filtering cartridge consists of the special “E-CO” nanoporous composite material in the shape of a hollow cylindrical form (310*165 mm) with one or two fastening discs, depending on performance (open-end/blind-end). Cartridges are adjusted to case flanges by four screws. The fuel to be treated enters the filter through an inlet elbow, and going through the cartridges, fills the separating chamber from where the treated fuel enters the main pipe through the outlet elbow. Mechanical impurities are left on the inside surface of cartridges, and drops of the water separated from the fuel get enlarged and drop into the sedimentation zone of the filter case. Accumulated water is discharged through a drain elbow located in the lower part of the filter case.
COST OF PRODUCT
We produce equipment in many versions, depending on the set of technological problems, such as environment-class production facility. To our experts was quickly formed to offer you, please contact us and provide the necessary technical information.